FREE Labubu Card Template

• When cutting out the card, make sure to follow the lines for the outside of the card. The inside of the card has a bleed to make sure that there is no white.
• When making the front of the card, I recommend using foam stickers to make it really pop. If you don't have any, you can just layer small pieces of cardstock and apply glue to that and it'll work exactly the same!
• When making the 3d effect on the front, make sure that they are layering properly. Ex: The "Exciting Macarons" and first set of clouds are on one layer so you would use one foam sticker, but the Labubu would be on top so it would be on a higher layer so you would use two foam stickers.
• The Labubus can be difficult to cut out. I recommend using an art knife for this or you can just use the Labubus from the medium difficulty template.
• Paper tends to crease when bent, especially if it's thick paper. For the brown loop, I used my hands to gently curl it, similar to the way you curl ribbon. This will prevent it from creasing as much.
• Threading the keyring through the card was a little difficult. I recommend gently pushing the cut area of the card out. This will make it a lot easier (but don't push too hard or else it will rip).
• You can also use a pair of tweezers to help thread the keyring through the card.

Happy gifting!